## building a database for SI units

Hello,
part of one of the projects i'm working on involves SI Units, and i am to incoporate them in a database structure.
I'm not yet very comfortable with data modelling and database building, so i come here to get some advices.

Basically, as defined by the SI system, there are 7 base units (m, kg, s, A, K, mol, cd).
Each of these has a name (metre), symbol (m), and quantity (length).

Then, comes a set of derived units. Each have a name (newton), symbol (N), quantity (force). Then each can be described as a combination of the 7 base units.
eg:
1 N = 1 kg.m/s^2 (or 1.kg.m.s^(-2) )
1 Hz = 1 s^(-1)
Each derived unit is a combination of some base units power (-3,-2,-1,1,2 or 3).
Sometimes, it is preferred to describe derived units as combinations of other derived units instead of basic ones.
For instance, you'de rather say :
1 V = 1 W/A
than
1 V = 1 kg.m^2.s^(-3).A^(-1)

Finally, there is a set of "additional units", which have a name, symbol, quantity, and are obtained by multiplying one of the existing units by a fixed number.

This fixed number can be either a prefix:
10^3 = kilo, 1 km = 10^3 m

Or an "arbitrary" constant:
1 min = 60 s
1 litre = 0.001 m^3
etc.

Now i'm facing this model and trying to put it into a database [img]images/smilies/tongue.gif[/img].
Do you guys have any advice on how i should handle it ?
Do you think i should separate each type of unit (base, derived, additional), or keep only one table for all units (with only the basic information).
What do you think is the better way to handle the composition of units from base units / other derived units ?
Should i use arrays, or a table with 7 column (one for each base unit) containing the power for the corresponding base unit (something like:
unit m kg s A K cd
V 2 1 -3 -1 0 0
).
Suggestions on how to handle the constant multiplication factors ?

This may seem a pretty simple model but as i said i'm pretty new to database modelling so any help is very very welcome.

Thanks
Quentin